Metal Impact Detector - Probe
Metal Impact Detector - Probe
Metal Impact Detector - Probe
Metal Impact Detector - Probe

Metal Impact Detector - Probe

Regular price €669,00
Unit price  per 
Shipping calculated at checkout.

Probe with 3 meters of armored sheath with connection prepared for the box or with free wires for connection to the electronic card
Although the standard size is 3m, different sizes are available, as well as particular lengths on request.

The standard kit is completed with a die-cast aluminum box or with an electronic board for installation inside the panel

Fix it by screws or magnets.

Tool designed for the industrial environment to be installed directly on the impact plate.
The detector is a small timed device equipped with a sensor that is particularly sensitive to the sounds generated by metal strikes. The very resistant box has a led on the front that lights up when the impact is detected.

It has a minimal footprint and can be easily installed on all types of systems, without the need to modify anything on the existing system. When the blow is detected, a neutral contact is closed which is available for any machinery management.

In the aluminum extrusion sector, it is used for detecting the fall of the billet bottom once it has been cut by the shear.

When the shear detaches the butt end from the die and it arrives on the plate, the impact between the metals produces a sound that activates a signal in the RCF (Butt end Fall Detector).

The generated signal can be used for different purposes: to stop the closure of the container, or to detect the actual fall of the piece of billet discarded by the LOGS shear (HOT SHEAR).